CAD Panacea: October 2007

Here is a quick guide on setting up a layout (or paper space) for plotting in AutoCAD 2000 and later. I used AutoCAD 2008 for these steps, and most of these steps should apply (except for the viewport locking) in all versions, 2000 and later. I know this looks like a lot of steps, but it's really easy. The best part is once you set up a layout, you never have to do it again. You can import this layout (or any other) into any other drawing.

Before starting, let me say there are many ways to do what I'm outlining here, this is simply one of them. There are also many options in AutoCAD that could cause one or more of these steps to be missing or could cause an extra step to appear. I'm using a stock copy of AutoCAD, right out of the box.

Preparation

First, open up the OPTIONS dialog, and switch to the Display tab.
Under Layout Elements, make sure all the checkboxes are checked ON, except "Create Viewport in New Layouts".
Close OPTIONS

Set the plotting options

Right Click on Layout1, choose Rename
Give it a name like "MY TEST".
Now click on the MY TEST layout.
The Page Setup Manager will appear, and "MY TEST" will be highlighted in the list.
Click the modify button.
The dialog that opens looks a lot like the PLOT dialog.
Set your printer, paper size, plot style table, orientation, etc.
Leave "What to Plot" set to "Layout"
Make sure the scale is 1:1
Click Ok, then Close the Page Setup manager.

Create the Viewport

Create a Viewport
Type in the command MVIEW (or choose View, Viewports, 1 Viewport from the pull-down menus)
Pick a rectangle on your "paper"
The contents of model space will appear within this viewport. If you have objects spread out in MS, you may not see anything. Hang on, we'll fix this.
In the Status Bar of AutoCAD, find the PAPER button. Click it. It will change to MODEL. Now your cursor is restricted to the limits of the viewport. (If you do not have this PAPER button, use the type in command MSPACE to switch to Model Space)
Pan or zoom as desired. Notice how only the MS entities move. Layout entities stay put.
Now let's scale the model accurately. Type in ZOOM, the "C" for Center. Then pick a point roughly on the center of your model.
Now enter the scale factor. If the scale is 1"=50', enter 1/50XP. If the scale is 1"=20', enter 1/20XP. You can also use the viewport toolbar to set the scale, but you may get undesired results.
After you have set the scale, you can PAN without altering the zoom level.
Once you are satisfied, click the MODEL button in the status bar. It will change to PAPER.(If you do not have this MODEL button, use the type in command PSPACE to switch to Paper Space)
Click on the viewport to highlight the grips. Right click anywhere and choose Display Locked, Yes.

You are ready to go now. No more selecting the printer and paper size each time you want to print. It's ready to go. As mentioned before, you can import this layout into any other drawing. Here is how.

Importing this layout into another drawing

Save the drawing you have been working on.
Open a different drawing.
Right click on any layout tab.
Choose From Template
Change the files of Type from "DWT" to "DWG"
Find the DWG that you just saved and select it.
A new dialog will appear that contains the "MY TEST" layout. Select it and press OK.
The layout you created earlier has now been imported into the current drawing.

For best results, create the various layouts you need in your template drawings. Then they will always be there when you start a new drawing. You can add a sheet border and title block to the layout also.

Part 2 is here

Labels: AutoCAD, AutoCAD 2008, AutoCAD LT, Tips

PermaLink Posted 10/30/2007 08:52:00 PM Comments (2)

If you use Thunderbird to read newsgroups, and have previously used Outlook Express, read on....

In Outlook Express, you can control the sort method of every newsgroup by going to View->Sort By. In Thunderbird, the default sort order is controlled per newsgroup. If you don't want to set this for every newsgroup you can change this, but it's sort of hidden.

Go to Tools, Options, Advanced button, General tab.
Click the Config Editor button.
In the Filter field, enter "sort"
Find "mailnews.default_news_sort_order" and set the value to 2
That changes the default sort order to descending, threaded.

Thunderbird 2.0 also allows you to add custom tags for highlighting filtered messages by color. Unfortunately, it only applies to messages as they arrive and not to message headers already downloaded.

Labels: Other software, Tips

PermaLink Posted 10/12/2007 09:16:00 PM Comments (1)